PVC UV Decorative Panel Suppliers

PVC UV Decorative Panel Suppliers – UV Wall Board Manufacturer

Haining Yunxi New Material Technology Co., Ltd. is a direct PVC UV Decorative Panel Suppliers based in Yuanhua Town, Haining City, Zhejiang Province – the heart of China’s ceiling industry. With two factories covering nearly 20,000 square meters and a dedicated R&D team, we produce UV-cured PVC wall panels that combine high-gloss aesthetics with durable surface protection. Our UV board range serves residential, hospitality, retail, and institutional projects, offering a reliable alternative to traditional wall coverings.

We focus on independent research, formulation, and production of wood veneer wall panels and flooring. Our UV boards are engineered for applications where surface hardness, chemical resistance, and visual consistency matter – from hotel corridors and bathroom walls to kitchen splashbacks and feature walls.

UV Board Technology and Performance

UV board, also known as UV-cured decorative panel, uses ultraviolet light to instantly cure a coating applied to a PVC substrate. This process creates a dense, cross-linked surface layer that significantly improves scratch resistance, gloss retention, and color vividness compared to standard laminated or painted panels.

• High-gloss finish: Available in polished marble, wood grain, and solid color designs.
• Scratch and abrasion resistance: The cured coating withstands daily wear in high-traffic areas.
• Moisture and humidity resistance: Suitable for bathrooms, kitchens, and coastal environments.
• Chemical resistance: Resists common cleaning agents and mild chemicals.
• Low VOC: Our production uses low-emission coatings, contributing to healthier indoor air.

Our UV Board Range and Applications

We supply UV boards in various sizes, thicknesses, and surface finishes to match project specifications. The primary product in this category is the UV Shield High-Gloss Scratch-Resistant Marble PVC Wall Panel Board YXUV12225, designed for wall cladding in commercial and residential settings.

Our UV boards are also used for ceiling panels, cabinet doors, and furniture surfaces, where a durable, easy-to-clean finish is required.

Engineering and Customization

We understand that each project has unique dimensional and performance requirements. Our engineering team works with you to customize panel size, thickness, edge profile, and surface design. We can match specific color codes or provide samples for approval before mass production.

• Size customization: Standard widths include 1220 mm and 600 mm; lengths can be tailored.
• Thickness options: From 3 mm for wall panels to thicker boards for furniture applications.
• Surface design: Choose from our existing marble, wood, and abstract patterns, or supply your own artwork.
• Edge treatment: Square edge, V-groove, or tongue-and-groove profiles for seamless installation.

Quality Assurance and Testing

As a factory, we control every stage from raw material selection to final inspection. We operate a quality testing laboratory and follow multi-link inspection procedures. Our UV boards undergo checks for surface hardness, adhesion, gloss uniformity, and dimensional stability. We also verify that our products meet relevant environmental standards, using low-VOC coatings and responsibly sourced PVC resin.

Installation and Maintenance

UV boards are designed for straightforward installation using adhesives, clips, or mechanical fasteners, depending on the substrate and application. We provide installation guidelines and recommend suitable adhesives for different wall conditions. For maintenance, a soft cloth and mild detergent are sufficient; avoid abrasive cleaners that may dull the gloss.

Information We Use to Configure Your Solution

To prepare an accurate quotation and production plan, we need the following project details:

• Application type (wall, ceiling, furniture, etc.)
• Required dimensions (width, length, thickness)
• Surface finish and color preference
• Quantity per design
• Installation method and substrate condition
• Delivery destination and Incoterms preference

With this information, we can recommend the most suitable UV board configuration, provide samples, and confirm production lead times.

FAQs

Are your UV boards suitable for wet areas like bathrooms?

Yes. The PVC substrate is inherently moisture-resistant, and the UV-cured coating adds a protective barrier that prevents water absorption and mold growth. We recommend proper sealing at joints and edges during installation.

Can you match a specific color or pattern?

We can develop custom colors and patterns based on your reference. Our R&D team will work with you to achieve the desired visual effect, and we can produce small batches for approval before full-scale production.

What is the minimum order quantity?

MOQ depends on the product type and customization level. For standard UV boards, we can accommodate smaller trial orders. For custom designs, a higher MOQ may apply to justify tooling and setup costs.

How do you ensure product quality during mass production?

We conduct in-process inspections at each stage, from substrate preparation to coating and curing. Final products are tested for gloss, hardness, and dimensional accuracy. We also keep batch records for traceability.

What are your payment and delivery terms?

We typically require a 30% deposit before production and 70% balance against shipping documents. We can quote on FOB, CIF, or other Incoterms. Delivery time varies with order size and customization, but we provide a confirmed schedule with your quotation.